BANK • PEŁNY PODGLĄD

codzienność: Phone connector (audio)

Jak to działa? • wikipedia-seeded

candidateneeds-reviewC 100%

Fakt używany przez pipeline

5 mm (1⁄8 in) for "mini" connectors, and only 2..

Oryginalny claim Seekera

5 mm (1⁄8 in) for "mini" connectors, and only 2.

Pełniejszy materiał źródłowy / excerpt

A phone connector is a family of cylindrically shaped electrical connectors primarily for analog audio signals. Invented in the late 19th century for telephone switchboards, the phone connector remains in use for interfacing wired audio equipment, such as headphones, speakers, microphones, mixing consoles, and electronic musical instruments (e.g. electric guitars, keyboards, and effects units). A male connector (a plug), is mated into a female connector (a socket), though other terminology is used. Plugs have two to five electrical contacts. The tip contact is indented with a groove. The sleeve contact is nearest the (conductive or insulated) handle. Contacts are insulated from each other by a band of non-conductive material. Between the tip and sleeve are zero to three ring contacts. Since phone connectors have many uses, it is common to simply name the connector according to its number of rings: The sleeve is usually a common ground reference voltage or return current for signals in the tip and any rings. Thus, the number of transmittable signals is less than the number of contacts. The outside diameter of the sleeve is 6.35 millimeters (1⁄4 inch) for full-sized connectors, 3.5 mm (1⁄8 in) for "mini" connectors, and only 2.5 mm (1⁄10 in) for "sub-mini" connectors. Rings are typically the same diameter as the sleeve.

Kategoria: jezyk

Rodzina: liczby

Jakość źródła: 65/100

Próby weryfikacji: 3

Notatka fact-checku: Fact-check 3.0-content-aware: no sufficient claim-bound corroboration after 3 healthy attempts. Scope=verify the factual claim. Required independent sources=2; stored evidence groups=0. Provider/API errors did not consume attempts. | Fact-check 4.3.2: research wznowiony bez zdejmowania HOLD. Poprzednia metoda: factcheck-300-content-aware. | Fact-check 4.3.2: research wznowiony bez zdejmowania HOLD. Poprzednia metoda: factcheck-weekly-research-432.

ŹRÓDŁA I DOWODY

3 zapisanych źródeł

Wikipedia ENpomocniczeniezależne

Evidence: 85 • authority: 72

A phone connector is a family of cylindrically shaped electrical connectors primarily for analog audio signals. Invented in the late 19th century for telephone switchboards, the phone connector remains in use for interfacing wired audio equipment, such as headphones, speakers, microphones, mixing consoles, and electronic musical instruments (e.g. electric guitars, keyboards, and effects units). A male connector (a plug), is mated into a female connector (a socket), though other terminology is used. Plugs have two to five electrical contacts. The tip contact is indented with a groove. The sleeve contact is nearest the (conductive or insulated) handle. Contacts are insulated from each other b…

Otwórz źródło ↗

Wikipedia ENpomocnicze

Evidence: 54 • authority: 72

Audio connectors and video connectors are electrical or optical connectors for carrying audio or video signals. Audio interfaces or video interfaces define physical parameters and interpretation of signals. Some connectors and interfaces carry either audio only or video only, whereas others carry both, audio and video. For digital audio and digital video, this can be thought of as defining the physical layer, data link layer, and most or all of the application layer. For analog audio and analog video, these functions are all represented in a single signal specification like NTSC or the direct speaker-driving signal of analog audio. Physical characteristics of the electrical or optical equip…

Otwórz źródło ↗

Wikipedia ENpomocnicze

Evidence: — • authority: 72

The DIN connector is an electrical signal connector that was standardized by the Deutsches Institut für Normung (DIN), the German Institute for Standards, in the mid 1950s, initially with three pins for mono, but when stereo connections and gear appeared in the late 1950s, versions with five pins or more were made. The male DIN connectors (plugs) feature a 13.2 mm diameter metal shield with a notch that sets the orientation in which plug and socket can mate. The range of DIN connectors, different only in the configuration of the pins, has been standardized as DIN 41524 / IEC/DIN EN 60130-9 (3-pin at 90° and 5-pin at 45°); DIN 45322 (5-pin and 6-pin at 60°); DIN 45329 / IEC/DIN EN 60130–9 (7…

Otwórz źródło ↗